Use the GCD Tolerances tab to set either an overall tolerance policy for the component, or specific tolerance overrides for GCDs.
-
To set a tolerance policy for the component overall, click the Tolerance Policy… button. See Use the Tolerance Policy Editor.
-
To specify tolerance and roughness requirements for a GCD, first select the GCD and then click the Edit Tolerances button. See Edit Tolerances.
When you edit the tolerance values for a GCD, each override appears the bottom of the Cost Guide, with a Revise button.
Tip: For more GCD details, switch to the Geometric Cost Drivers panel and display the GCD Properties table.